RailNet Documentation

RailNet Updater Manual

A simple guide for updating RailNet devices with official RailNet firmware over USB.

RailNet Updater software screenshot

Interface Overview

  • Device Selection: Choose the COM port your RailNet device is connected to.
  • Firmware Bundle: Upload or drag-and-drop your firmware .zip file.
  • Detected Model: Automatically populated from the firmware bundle.
  • Flash Device: Starts the firmware flashing process.
  • Factory Restore: Erases the device before flashing (optional).
  • Progress Bar & Steps: Displays update progress and stages.
  • Advanced Log: Expand to view detailed output and errors.

Overview

The RailNet Updater flashes firmware bundles (.zip) to RailNet devices over USB.

What You Need

  • Windows PC
  • RailNet device connected by USB
  • Official RailNet firmware bundle (.zip)

Quick Start

  1. Connect the device via USB.
  2. Open RailNet Updater.
  3. Select the correct COM port.
  4. Load the firmware (.zip).
  5. Confirm the detected model.
  6. Optional: enable Factory Restore.
  7. Click Flash Device and wait for completion.

Factory Restore

  • Erases the entire device before installing firmware.
  • Use for clean installs or troubleshooting.

Progress & Logs

  • Progress bar shows the current update stage.
  • Advanced log provides detailed output and errors.

Common Issues

  • No ports listed: Try a different USB cable or USB port, or install the device driver.
  • Flashing tool missing: Reinstall the latest updater build.

Support Checklist

  • Screenshot of the error
  • Firmware file used
  • COM port selected